Meridian Audio FDP-DILA2 - Manual (Page 26)

2
6
Connecting to Various Devices
Connecting to Devices which Control the Projector
Before connection, be sure to turn off both the projector and devices to be connected.
• Read thoroughly the manual that comes with each device to be connected.
• By connecting a computer to the RS-232C terminal, you can control the projector. Also, you can make an infrared remote
sensor extension unit and connect it to the REMOTE terminal of the projector.
* Obtain connection cables as required. Use a reverse connection cable.
* For details, refer to “RS-232C external control” on page 74.
* RS232 or IR control of the Video Processor is also required if controling the projector
Note
• When connecting the cable to the REMOTE terminal, refer to “How to attach the ferrite core” on page 29.
Y
P B /B-Y
P R /R-Y
IN
REMOTE
Y/C
VIDEO
R
G
B
H
IN OUT
V
• Desktop type
To RS-232C connector
To RS-232C connector
RS-232C reverse
connection cable
(separately available)
To RS-232C connector
• Note type
To R
E
M
O
TE
t
e
rm
in
al
TO CONTROL
Infrared remote sensor
extension unit
(Needs to be made)
* By directly connecting the OUT terminal
to the second projector IN
terminal, a number of
units can be controlled by a single
computer.
*