Fluke 574 - Manual (Page 20)

20
574
Setup - Time and Date
To set the time, press
SETUP (N) three times.
Change the time (2)
using the Up and Down
keys (C).
Then press ENTER (D)
for each time segment to
activate this time setting.
The time appears on the
display and is stored within
the data logger.
TIME
N
2
C
D
N
DATE
To set the date, press
SETUP (N) four times.
Change the date using the
Up and Down keys (C).
Then press ENTER (D)
for each date segment to
activate this date setting.
The date (2) is stored
within the data logger.
2
D
C