Fluke 574 - Manual (Page 21)

21
574
Setup - Offset and Min-Max Values
MODE
MAX MIN DIF AVG TC/NTC MAX MIN DIF AVG TC/NTC MAX MIN DIF AVG TC/NTC MAX MIN DIF AVG TC/NTC MAX MIN DIF AVG TC/NTC MAX MIN DIF AVG TC/NTC MAX MIN DIF AVG TC/NTC MAX MIN DIF AVG TC/NTC MAX MIN DIF AVG TC/NTC MAX MIN DIF AVG TC/NTC MAX MIN DIF AVG TC/NTC MAX MIN DIF AVG TC/NTC MAX MIN DIF AVG TC/NTC MAX MIN DIF AVG TC/NTC MAX MIN DIF AVG TC/NTC MAX MIN DIF AVG TC/NTC MAX MIN DIF AVG TC/NTC MAX MIN DIF AVG TC/NTC MAX MIN DIF AVG TC/NTC MIN-MAX MIN-MAX
O
6
N
D
C
confirm. The OFFSET feature allows the temperature
values for several units to be matched, correcting for
the allowed temperature tolerance difference between
units. The OFFSET function can also be used to
increase the accuracy for a narrow temperature range.
This function is used with a
selected emissivity to add
or subtract an offset value
(±10°C/±18°F) to the
temperature value. Press
the Setup button (N) until
"Offset" appears in the
display. With the arrow
keys (C) adjust the display
to the corrected value.
Press ENTER (D) to
OFFSET
To show the minimum TT
and maximum
temperature values dur-
ing a measurement at the
bottom of the display,
press MODE (O) until the
two values appear (6).
MIN-MAX VALUES MIN-MAX V MIN-MAX V
MODE