Installing the software – Farallon Communications PB 1400 User Manual
Page 9
Advertising
Installation
9
Installing the software
After the PB 1400 Ethernet Card is connected to your network,
complete the installation process by installing the Farallon software.
Software installation for the PB 1400 Ethernet Card involves the
following three steps:
1.
Running the installer
2.
Configuring the networking software
3.
Connecting to network services
Running the installer
Before installing Farallon software, restart your Macintosh while
holding down the Shift key. This temporarily disables extensions that
may cause conflicts. Then insert the PB 1400 Ethernet EN Installer
disk into the floppy drive of your Macintosh.
Double-click the Installer icon. The Farallon PB 1400 EN Installer
dialog box appears.
Advertising