Fluke Thermometer 576 - Manual (Page 27)

27
576
DIP Switches
Some functions of the unit be changed by using
the DIP switches. These switches are located in
the Battery compartement of the unit.
Lock
C/F
Auto/All
Laserflash
Ltd. Access Ltd. Access
Set Default
Backlight
Buzzer
TC-J/TC-K
NTC/TC
Time/Date
Photoflash
ON
Sets the unit into con-
tinuous measuring mode
Switches between
degrees Celsius and
Fahrenheit
Switches acoustic
signals On or Off
Switches the backlight of
the display On or Off
Sets the unit’s values to
default, if On
If On, the function
buttons are blocked
If On, the laser will flash
when temperature val-
ues exceed alarm
If On, photoflash is
activated
Auto = automatic ...*
All = every photo is taken
with flash
Time or Date will be
displayed
Thermocouple settings -
refer to the
corresponding
chapter
*...photoflash at the same position is used after photo with
insufficient light is attempted.