Fluke Thermometer 576 User Manual
Page 29
29
576
Symptom
Display Code
Problem
Action
Photo quality
Light is insufficient for photo
Use Photoflash
diminished with
without flash
always on (Dip switch
available light.
“Auto/All”set to “All”
(Abrupt transitions
or provide more
between color shades)
ambient light.
Connection of unit
Wrong com port selected
Select correct com
to PC software
or correct com port in use.
or disconnect other
does not happen
device from correct
when software started
com port
No picture in
More than one video
Right mouse click
“Live” mode
source is installed
on the “Live” mode
window
window. Choose
correct “Video source”
in the menu.
Unit indicates
The light is too bright for
Go to next location
“Use flash!” in
a photo
or reduce brightness.
bright light
Unit leaves LOG
The last position has been used If another recording
after a photo and
to record photo and data.
of the data and
data recorded.
photo is required, then
push Enter button and
use arrow keys to
re-record a position.
Photo Mem!
All memory for storing photos
1. Download existing
has been used.
photos and data and
clear memory.
- or -
2. If you don’t mind
losing photos
in the unit, you can go
to Setup in the unit,
push the button until
“Clear photo” appears
in the display and
press Enter.