Meridian Audio G Series - Manual (Page 19)

I n s t a l l i n g
t h e p o w e r
a m p l i f i e r
1 5
To wire to passive loudspeakers in bridge mode
Loudspeaker
G55 Five-channel Power Amplifier
Treble
Bass/mid
Loudspeaker
ON
INPUT INPUT
ON Treble
Bass/mid
You can wire channels 1/2 and 4/5 in bridge output mode, to
obtain more than twice the power output.
• Switch the BRIDGE MODE switches to the ON position.
• Connect the supplied bridge mode links between the black
(–) CHANNEL 1/2 and CHANNEL 4/5 terminals, as marked on the
back panel.
• Connect the loudspeakers between one pair of the red (+)
CHANNEL 1/2 and CHANNEL 4/5 terminals.
• Connect the audio inputs to the BALANCED or UNBALANCED
CHANNEL 1 and CHANNEL 5 inputs, as appropriate.
You can bi-wire in bridge mode by using the other pair of red
terminals to connect separately to the loudspeaker treble unit.
G Series Power Amplifier 15 9/5/06 11:59:52 am