Meridian Audio G Series - Manual (Page 20)

I n s t a l l i n g
t h e p o w e r
a m p l i f i e r
1 6
To bi-amp to two passive loudspeakers
Loudspeaker
Treble
Bass/mid
Loudspeaker
OFF
INPUT INPUT
OFF Treble
Bass/mid
G55 Five-channel Power Amplifier
Extremely high sound quality can be achieved using two separate
channels of the power amplifier to drive the LF and HF units in
each loudspeaker.
• Switch the BRIDGE MODE switches to the OFF position.
Important: Remove the links bridging the LF and HF terminals on
the back of each loudspeaker.
• Connect the red and black terminals from the LF and HF units on
the left loudspeaker to the red and black terminals on channels 1
and 2.
• Likewise, connect the LF and HF units from the right loudspeaker
to channels 4 and 5.
• Connect the left audio output from the preamplifier to both
inputs on channels 1 and 2.
• Connect the right audio output from the preamplifier to both
inputs on channels 4 and 5.
G Series Power Amplifier 16 9/5/06 11:59:54 am