Figure 6-33: event log – Freedom9 IP 100 User Manual
Page 70
6.5.7 Event
Log
Figure 6-33: Event Log
Important events such as a login failure or a firmware update are logged to a selection of logging
destinations (see Figure 6-33). Each of these events belongs to an event group, which can be
selected separately.
List logging enabled: This is the main method to log events. This method uses the internal log
list of the freeView IP 100. To display the log, click on “Event Log” under the “Maintenance” menu.
The number of log entries shown per page can be changed in this section, and the log can also
be cleared by clicking the “Clear” button. Note: The maximum number of events that can be
recorded in the log is 1000. Any entry added above this will overwrite the oldest entry in the log.
Also, if the device is reset through the web interface, the log information will be stored. However,
if the device loses power or a hard reset is performed, the log will be cleared.
68