Freedom9 IP 100 - Manual (Page 75)

freeView IP 100 User’s Manual
6.6.4 Unit Reset
Figure 6-38: Unit Reset
This section allows the user to reset specific parts of the device. The parts include: the keyboard
and mouse, the video engine, and the entire device itself. Resetting the device itself is mainly
needed to activate a newly updated firmware. It will close all current connections to the
administration console and to the Remote Console. The whole process will take about half a
minute. Resetting sub devices (e.g. video engine) will take only a few seconds and does not
result in closing connections.
Note: Only the super user is allowed to reset the device.
73