FujiFilm 3000 - Manual (Page 18)

16
photograph
photo mode
PRINTING IN PHOTO MODE
Press the paper type key to select the
type of paper being used. Press the mode key to set the printer
in photo mode. Select the desired
output size and level of contrast.
'PHOTO' is shown here.
4
The paper type is shown here.
Points to note when using photo mode
• Text portions are sometimes printed in slightly lighter colors.
If this happens, set the print contrast to a darker position.
• White areas on photographs may appear with dot-shaped
blotches in the print.
If this happens, set the print contrast to a lighter position.
• Horizontal and/or vertical lines may appear at regular intervals
on the print. This is normal and does not indicate an error in the
printing process.
• Yellow portions of photographs are sometimes poorly
reproduced.
• Printing speed in photo mode is slower than that of normal
mode.
Place the original into the document
bay face down. Press the start/stop
key to begin printing.