FujiFilm 3000 - Manual (Page 19)

17
PRINTING IN REVERSE MODE
Press the paper type key to select the
type of paper being used. Press the mode key to set the printer
in reverse mode. Select the desired
output size and level of contrast.
Place the original into the document
bay face down. Press the start/stop
key to begin printing.
Points to note when using reverse mode
• The printer is designed to monitor the temperature of the
thermal heads and to control printing speed so as to prevent
them from overheating.
(If this happens, a ‘SLOW MODE’ message will appear on the
message display.)
input
document
reverse mode
The paper type is shown here.
'REVERSE' is shown here.
4