Meridian Audio DSP5000C - Manual (Page 23)

Operation 23
DSP5000C User Guide
Controlling a Meridian CD player
Use of handset to control CD
You are advised to operate the system with the MSR.
Playing a disc
On the MSR, the following keys operate the Meridian CD:
To start a disc
1. Press Play
To stop the disc
1. Press Stop
To make the disc pause
1. Press Pause
The Pause indication on the Meridian CD will light up. If the DSP5000C
master was displaying track or time information, it will display
PSE
To start it again (‘unpause’)
1. Press Pause
To cause a disc to repeat
1. Press Repeat
The Repeat light on the CD player will light up.
Scanning a disc
To move forward or backward in a track
1. Press
u
or
v
Selecting tracks
To move on to the next track at any time
1. Press Play
or
Next and Previous can be used – as on the Meridian CD front panel – to
select a track number. This will result in the appearance of the ‘select
cursor’ display. For example
1. Press Next repeatedly until you see the 'select track 5' display. In 500
mode the display looks like:
– 5
In 200 mode the display looks like:
S. 5
You can now either engage Track 5 by pressing Play, or simply wait for
the track to engage.
The DSP5000C directs instructions from the MSR to the current source.
Note When selecting tracks by number, you do not need to worry about
Track and Preset buttons, as you do with the Meridian 209 remote
control.