Meridian Audio DSP5000C - Manual (Page 50)

Help 50
DSP5000C User Guide
Radio interference
Note DSP5000C is designed to comply with all relevant international
standards concerning local-oscillator re-radiation.
Note DSP5000C is a digital audio and computing device which has been
designed to very high standards of electromagnetic compatibility.
FCC WARNING: This equipment generates and can radiate radio fre-
quency energy, and if not installed and used correctly in accordance with
our instructions may interfere with radio communications or radio and
television reception. It has been type-tested, and complies with the limits
set out in Subpart J, Part 15 of FCC rules for a Class B computing device.
These limits are intended to provide reasonable protection against such
interference in home installations.
If this equipment does interfere with or suffer interference from radio or
television reception, then the following measures should be tried:
1. Reorient the receiving aerial (or antenna), or route the antenna cable
of the receiver as far away as possible from the DSP5000C and its
cabling
2. Ensure that the receiver uses well-screened antenna cable
3. Relocate the receiver with respect to the DSP5000C
4. Connect the receiver and this product to different AC outlets
5. If the problem persists, contact your dealer
EEC This product has been designed to comply with the limits set out in
EN55013 and EN55020C.
REMEMBER to switch all units off before changing any connections.
Cleaning
The cabinet of the DSP5000C is finished with veneer.
The display panel is glass, and should be cleaned using a barely damp
chamois leather.
Do not use abrasive cleaners on any part of the DSP5000C.
The phono connectors on the rear of the DSP5000C are gold-plated, and
need no cleaning if gold-plated phono plugs are used. Otherwise, we
recommend that you remove and replace each plug at least once a year.
A proprietary contact cleaner can be used to some advantage.
Maintenance & service
The Meridian DSP5000C has been carefully designed to give years of
untroubled service. There are no user-serviceable parts inside the case,
nor do the units require any form of maintenance.
In the unlikely event that your DSP5000C fails to function correctly, it
should be returned, in its original packing, to your Meridian dealer. In case
of difficulty, please write to the following address if you live in the UK:
Digital Gramophone & Wireless Ltd
14 Clifton Road
Huntingdon
Cambridgeshire PE18 7EJ