Furuno GP-7000 - Manual (Page 13)

9
3. ADJUSTMENTS
This chapter shows you how to adjust your unit, from the menu. When choosing item or
option from the menu, you may use the [ENTER] knob or the CursorPad ( ). For sake of
brevity the descriptions contained herein use the [ENTER] knob.
3.1 Choosing Position Data Source
If you intend to use a position data from a source other than the internal GPS receiver
follow the procedure below. Otherwise, go to paragraph 3.2.
1. Press the [MENU] key to show the menu bar.
Menu Bar
GENERAL PLOTTER MAP ALARMS ADVANCED INFO FIND
Menu bar
2. Rotate the [ENTER] knob to choose ADVANCED from the menu bar and then push the
[ENTER] knob.
FIX
NAVIGATE
COMPASS
INPUT/OUTPUT
EXT NMEA
GPS SIMULATION
ECHO SOUNDER SIMULATION On
SYSTEM UPDATE
ADVANCED menu