4 waypoint, route format, 5 external event format – Furuno GP-7000 User Manual

Page 18

Advertising
background image

14

3.4 Waypoint, Route Format

You may transfer waypoint and route data to another GP-7000 series unit or a PC in
Standard or Furuno format, via the NMEA1 port, NMEA2 port or PC NMEA IN port.

1. Press the [MENU] key to show the menu bar.
2. Rotate the [ENTER] knob to choose ADVANCED from the menu bar and then push the

[ENTER] knob.

3. Rotate the [ENTER] knob to choose INPUT/OUTPUT and then push the [ENTER] knob.
4. Rotate the [ENTER] knob to choose WPL/RTE FORMAT and then push the [ENTER]

knob.

Standard

Furuno

5. Choose Furuno or Standard as appropriate and then press then push the [ENTER]

knob.

Standard:

NMEA format WPL and RTE sentences are output when “SEND” is executed

to transfer waypoint list or route list.
Furuno:

Furuno format WPL and RTE sentences are output when “SEND” is executed

to transfer waypoint list or route list. Waypoint color, shape and comment data are sent.

6. Press the [MENU] key to close the menu.

3.5 External Event Format

If the equipment is equipped with an external event switch you may choose what mark is
inscribed on the screen when the switch is pressed. For connection of an external event
switch, see the interconnection diagram.

1. Press the [MENU] key to show the menu bar.
2. Rotate the [ENTER] knob to choose ADVANCED from the menu bar and then push the

[ENTER] knob.

3. Rotate the [ENTER] knob to choose INPUT/OUTPUT and then push the [ENTER] knob.
4. Rotate the [ENTER] knob to choose EXTERNAL EVENT and then push the [ENTER]

knob.

Off

WPT
MOB

5. Choose Off, WPT or MOB as appropriate and then push the [ENTER] knob.

Off:

No event switch is connected.

WPT:

Waypoint is registered at ship’s position if the cursor is not displayed, or at cursor

position if the cursor is displayed.
MOB:

MOB is registered at ship’s position.

6. Press the [MENU] key to close the menu.

Advertising