Wiring – Furuno GP-7000 User Manual
Page 9
Advertising
5
2. WIRING
The figure below shows the basic wiring scheme.
Shield
White
Black
Ground
ANTENNA UNIT
GPA-017
MJ-A15A3F0013-035-3A,
3.5 m
FROM LEFT
PC/NMEA IN: PC, NMEA device, buzzer
NMEA 2: Radar, autopilot, video sounder,
temperature indicator, etc.
NMEA 1: Same as NMEA 2
Power
Source
Antenna Cable, 10 m
Display unit, rear view
Power source
The power source is a 12-24 VDC battery. Be sure the power cable is tightly fastened to the
power source and the polarity (plus and minus) is correct. Connect the white lead to the
positive terminal(+) and the black lead to the negative terminal(-).
Advertising