Yamaha RX-797 - Manual (Page 10)

CONTROLS AND FUNCTIONS
8
9
Changes the control area (see page 36).
0 SPEAKERS A/B
Turns on or off the set of speakers connected to the
SPEAKERS A and/or SPEAKERS B terminals on the rear
panel of this unit when the corresponding button is
pressed each time.
A CODE SET
Use to set up remote control codes (see page 38).
B SLEEP
Sets the sleep timer.
C VOLUME +/–
Increases or decreases the sound output level.
• This does not affect the OUT (REC) level.
• When you press VOLUME +/– to control the sound output
level of this unit, VOLUME on the front panel rotates.
D MUTE
Mutes the sound output. Press again to restore the sound
output to the previous volume level (see page 22).
The sound output to Zone 2 is not muted.
Notes
Note