Yamaha RX-797 - Manual (Page 11)

CONTROLS AND FUNCTIONS
9
INTR
ODUCTION
English
This section describes the function of each button on the
Zone 2 remote control used to control Zone 2. You can
also use the Zone 2 remote control to control YAMAHA
CD players and YAMAHA cassette tape deck.
1 Infrared signal transmitter
Sends infrared signals.
2 Input selector buttons
Select the desired input source of Zone 2.
3 PRESET u / d
Selects the preset station number (1 to 8) when TUNER is
selected as the input source.
4 A/B/C/D/E
Selects the preset station group (A to E) when TUNER is
selected as the input source.
5 CD/TAPE control buttons
Controls YAMAHA CD players or YAMAHA cassette
tape deck.
6 ID1/ID2 switch
Switches the remote control ID between ID1 and ID2 (see
page 33).
7 POWER
Turns on Zone 2.
8 STANDBY
Sets Zone 2 to the standby mode.
9 VOLUME +/–
Increases or decreases the sound output level of Zone 2.
This does not affect the OUT (REC) level.
0 MUTE
Mutes the sound output to Zone 2. Press again to restore
the sound output to the previous volume level.
A CD/TAPE switch
Switches the function of the control buttons numbered 5
between controlling YAMAHA CD players and
controlling YAMAHA cassette tape deck.
Zone 2 remote control
CD PHONO
ZONE 2
TUNER
MD/TAPE VCR DTV/CBL
DVD
POWER
STANDBY
+
–
u
d
REC
DISC
p
DIR B DIR A
A/B
A/B/C/D/E
MUTE
PRESET VOLUME
TAPE CD ID2 ID1
w e f
b s a
DISPLAY
7
8
9
0
A
1
2
3
4
5
6
(Europe model)
Note