Frymaster H50 Series User Manual
Page 103
2-40
ITEM
PART #
COMPONENT
1
Pump Motor
826-1712
100-120 VAC 50/60Hz (with gasket 816-0093)
826-1756
208 VAC 50/60 Hz (with gasket 816-0093)
826-1270
230-250 VAC 50/60 Hz (with gasket 816-0093)
*
807-11973
Pump Service Kit (gasket, shaft seal, and two O-rings)
*
806-6728SP
Pump Wiring Assembly (this component is furnished with above motors)
2
826-1264
Pump, 4 GPM (15 LPM) (with gasket 816-0093 and mounting screws)
13
826-1360
Screw, Handle (Pkg. of 25)
14
810-0180
Handle, Plated Diecast Metal (for use on bases built before August 1997)
5
813-0368
Nipple, ½-inch x 16-inch
6
813-0156
Pipe Plug, ½-inch
7
813-0003
Tee, ½-inch
8
810-1057
Flexline, ⅝ -inch x 13-inch Oil Return (two female ends)
9
813-0275
Nipple, ½-inch x 9-inch
10
810-0278
Valve, ½-inch Ball
11
902-0883
Handle, Right Valve
901-0883
Handle, Left Valve
12
813-0165
Elbow, ½-inch x 90º Street
13
813-0022
Nipple, ½-inch Close
14
823-1356
Disconnect Fitting Male
15
826-1392
O-Ring (Pkg. of 5)
16
901-0883
Handle, Left Dual-Vat Valve
17
810-1159
Flexline, 5-inch Oil Return (two female ends)
18
810-1668
Adapter, ⅝ -inch Female to ½-inch Female (used with Item 17)
*
810-1669
Adapter, ⅝ -inch Female to ½-inch Male (used with Item 17)
*
826-1890
Flexline Kit, 7-Inch Oil Return (Items 17, 18, and 810-1669)
19
810-1160
Flexline, 3-inch Oil Return (two female ends)
20
816-0102
Grommet, Oil Diverter
21
900-1472
Diverter, Oil
22
910-1627
Bracket, Male Disconnect Support
23
806-4694SP
Contactor Block Assembly
*
813-0117
Nipple, ¾-inch x 3½-inch
*
807-1600
Thermal Switch, 100-120V Baldor Motors
*
807-1601
Thermal Switch, 200-250V Baldor Motors
*
807-1598
Thermal Switch, 100-120V Magnatek Motors
*
807-1599
Thermal Switch, 200-250V Magnatek Motors
*
810-1062
Wiring Harness, Controller to Filter
*
806-7020SP
Heater Assembly Strip, 120 VAC 50W, 70-inch
807-1408
Heater Strip Only, 120 VAC 50W, 70-inch
*
806-7021SP
Heater Assembly Strip, 250 VAC 90W, 70-inch
807-2348
Heater Strip Only, 250 VAC 90W, 70-inch
*
811-0861
Foam Tape Insulation 3-inch wide (by the foot)
*
811-0746
Tape, Aluminum (2-inch x 50-yard (46m) roll)
* Not illustrated