Foster Faust 90 multifunctional oven 18 7167-042 - Manual (Page 3)

20
INSTALLATION INSTRUCTIONS
Installing the built-in oven into the cabinet
The oven
can be
installed
either on
column
cabinets or
beneath
cabinet
worktops.
The cabinet
recess must
have the
following
dimensions: 865x467 mm.
An opening must be cut into the back of the oven cabinet or
support shelf (towards the rear) to ensure adequate air flow
and ventilation for the oven to cool during operation.
Make sure that the oven is safely installed in the cabinet. Use
the 4 screws (A) to secure the oven.
Cabinet features
The cabinet must have the following features:
• The cabinet and related components must be able to withstand a temperature of
150°C without deforming and/or surface defects appearing.
• The cabinet must not interfere with the passage of electrical wiring.
• The cabinet housing the oven must have a load capacity of 70 kg.
Electrical connections
IMPORTANT:
• The electrical connections must be carried out by a qualified and/or authorised
electrician only.
• The electrical connection must be carried out in conformity to the European
regulations in force.
• The electrical connection required is a single-phase 220-240 V, 50-60 Hz type
connection (check the product's rating plate regarding the correct supply voltage
and frequency).