Foster Faust 90 multifunctional oven 18 7167-042 - Manual (Page 7)

24
Electronic programmer
The clock shows the time up to 23 h : 59 min.
End-of-cooking time up to 23 h : 59 min., timer up to 23 h : 59 min., cooking time of 10
h.
Functions
Cooking time
C , end-of-cooking time S , time, timer B , minus - , plus + , manual selection
C - S , automatic programme A , manual mode .
Display
4-digit, 7-segment display for the time of day. Allows for checking the remaining
cooking time.
Setting the time
Select a function by pressing the relative button and set the time using buttons
+ and - .
Plus/minus (
+ / - ) buttons
Pressing button + increases the time while pressing - decreases it. Scroll the digits rapidly
by pressing and holding either button.
Setting the clock
Select the “set clock” function by simultaneously pressing
C and S while setting the time
with buttons + and - . This operation cancels the previously set cooking time programme
and disengages the manual mode.
Manual operation mode
This function allows for using the oven continuously. Simply press buttons
C and S
simultaneously on the electronic programmer. The control relay will activate. The letter
“
A ” (automatic) will disappear from the display and the pot symbol C will appear. Any
previously set programme will be cancelled.
Semi-automatic operation mode with end-of-cooking time
Select function
C and set the end-of-cooking time using buttons + and - . The symbol
“ A ” and the pot symbol C will appear on the display, thereby activating the power
switch. When the clock reaches the programmed end-of-cooking time, a buzzer sounds
and the symbol “
A ” will flash intermittently; symbol "C" and the heating element will
then turn off and the oven will stop operating.