Foster Faust 90 multifunctional oven 18 7167-042 - Manual (Page 8)

25
Automatic operation mode
Select function
C and set the cooking time using buttons + and - . The symbol “ A ” and
the pot symbol C will appear on the display, thereby activating the power switch. Select
function S and the end-of-cooking time will appear. Set the end-of-cooking time using
buttons + and - . The power switch and pot symbol will disengage. The pot symbol will
reappear when the clock reaches the programmed start-of-cooking time.
At this point, insert the foodstuff in the muffle, select the desired cooking function and
programme the cooking temperature. At the end of the automatic mode, the symbol “
A ”
will flash. A buzzer will sound and the power switch and pot symbol will disengage.
Timer
Select button
B and set the required time using buttons + and - ; the bell symbol will
appear on the display. A buzzer sounds once the programmed time is reached.
Buzzer
The buzzer (1 Hz, intermittent) sounds for 7 minutes at the end of the programmed time.
Any button can be pressed to stop the buzzer. While the buzzer sounds, the frequency of
the sound can be adjusted by pressing and holding
- (“minus” button). Three different
frequencies can be selected.
Programme start and check
Each pre-set programme activates only once the cooking time has been set. The start time
can be checked any moment by selecting the previously programmed function.
Identifying programming errors
Incorrect programming occurs if the time of day falls within the programmed cooking
period - i.e. between the start and end of cooking time. In the event of incorrect
programming, a buzzer sounds and the symbol “
A ” will flash. The error can be rectified
by modifying one of the two cooking times.
Cancelling a programme
A cooking programme can be cancelled by selecting the manual mode. Likewise, when a
pre-set programme terminates autonomously, it is automatically cancelled for future
operations.