FORD 1999 Taurus - Manual (Page 243)

238
Rinse thoroughly with clear water. Do not use fuel,
kerosene, paint thinner, or other solvents to clean
your wiper blades. These will damage your blades.
To make reaching the wiper blades easy, simply
turn the ignition to the ACC position and turn your
wipers on. Wait for them to reach a vertical
position and turn the ignition to the OFF position.
Do not move the wipers manually. Manually
moving the wipers across the windshield may
damage them.
Wiper blade replacement
If the wiper blades still do not work properly after
you clean them, you may need to replace the wiper
blade assembly or the blade element. When
replacing the wiper blade assembly, blade refill, or
wiper arm always use a Motorcraft part or
equivalent. To replace the blades, follow the
instructions that come with them.
Tires
❑ Use an accurate tire pressure gauge.
❑ Check the tire pressure when tires are cold,
after the vehicle has been parked for at least
one hour or has been driven less than 3 miles
(5 km).
❑ Adjust tire pressure to recommended
specifications found on the Safety Compliance
Certification Label.
WARNING
Improperly inflated tires can affect
vehicle handling and can fail suddenly,
possibly resulting in loss of vehicle
control.
File:11fnmc8.ex
Update:Thu Jun 20 14:28:32 1996