FORD 1999 Taurus - Manual (Page 47)

42
4. Press the RESET control until the number
shown in the display is the correct number for
the zone you are in. When the zone number
reaches 15, pressing the RESET control will set
the zone number to 1.
5. Press the COMPASS control to complete the
zone setting. (To exit this mode without setting
a zone, press any control other than RESET
and COMPASS). The M/C may now display:
for a few seconds, and then it will return to the
normal compass heading mode. The zone setting
procedure is now complete.
Figure 2 — Zone map
File:03fnis8.ex
Update:Thu Jun 27 10:00:37 1996