Fluke Network Tester - Manual (Page 14)

NetTool
Users Manual
1-2
NetTool is available in the following models:
•
NetTool Standard: provides single-ended testing of
network devices. Also includes a Ping function and
the capability to display VLAN traffic and CDP
information.
•
NetTool Pro: includes all of the features in the
standard model plus the ability to do inline testing
between two devices, such as a PC and the network
switch. The Pro model also includes the Reporter, a
function that enables you to create and save test
reports.
•
NetTool VoIP: includes all of the features available
in NetTool Pro plus the ability to monitor VoIP (Voice
over IP) service.
NetTool Features
NetTool’s features and functions enable you to do the
following:
•
Verify the reliability of cabling and cabling
installations by testing for length, shorts, split pairs or
opens, including pin-to-pin wiremapping
•
Check a PC’s configuration and identify its network
•
Ping network devices to verify connectivity
•
“Listen” to traffic between network devices to detect
common connectivity problems (NetTool Pro and
VoIP models only)
•
Generate resource reports to document network and
PC performance (NetTool Pro and VoIP models
only).
Care and Maintenance
Treat your NetTool tester with care to ensure the best
performance. Clean the tester carefully by using a soft,
slightly damp cloth. Never use harsh detergents, solvents,
or abrasive cleaners.
Clean the LCD by gently wiping it with a soft cloth or
tissue moistened with isopropyl alcohol.
Package Contents
Take a moment to check the shipping container to make
sure that the contents match the list below. If any item is
missing, contact your place of purchase.
•
Four (4) AA batteries
•
Serial cable
•
RJ-45 cable
•
Wiremap adapter