Fluke Network Tester - Manual (Page 47)

5-1
Chapter 5
Troubleshooting Networks
Introduction
The information documented in this chapter can help you
evaluate the health of your network and assist you with
troubleshooting network problems.
NetTool features a Ping test, which is described in this
chapter. Use this test to verify connectivity between
devices on the network.
Finding Out About Your Network
To obtain information about the network NetTool is
plugged into, do the following:
1. Run Autotest (see “AutoTest” in Chapter 3 for
details).
2. To view details about the network, press
(Network icon).
The Network menu (Figure 5-1) is displayed:
ahn200s.bmp
Figure 5-1. Network Menu