GE 00024178 - Manual (Page 15)

1
Telephone Set Up
You can customize the following settings to suit your needs.
Rings to Answer Selects the number of rings before
the unit answers.
Message Length Sets the length of time allowed for
incoming messages.
Recording Quality Sets the recording quality between
standard (STD) and long play (LONG).
Remote Access Set your 3-digit code used for remote
access to the unit.
Display Contrast Selects the display contrast.
Local Area Code Sets your local area code for Dial Back.
TONE/PULSE Dialing Sets the phone for tone or pulse dialing.
Set Day
Sets the day.
Time/Date Sets the time and date.
Language Selects English, French or Spanish.
Setting the Rings to Answer
This setting allows you to set the number of rings before the unit answers a call. You
can choose from 2-8 or Toll Saver (see “Toll Saver.”)
1. Press and release the
MENU button. The screen displays RING TO ANSWER. The
unit announces, Setup Menu. Use SKIP to change setting. Press MENU to save
a setting.
2. Use SKIP or REPEAT for the desired setting (2-8, Toll Saver).
3. When finished, press MENU to confirm.
NOTE: To skip to the next setting, press MENU. To exit setup, press EXIT.
Default Settings
Rings to Answer 4
Message Length 2 minute
Recording Quality Standard
Security Code 1 2 3
Display Contrast 3
Local Area Code – – –
Dialing Tone
Day Sunday
Time/Date 12 a.m. 1/01
Language English