GE 00024178 - Manual (Page 35)


Message Indicators
The following special messages indicate the status of a message or the unit:
00 CALLS
The call record log is empty.
UNKNOWN NUMBER The incoming call does not have Caller ID service or their
service area is not linked to yours. If UNKNOWN NAME
appears along with a calling number, the name information for
that number was not available.
BLOCKED NUMBER The caller is registered as “Private Number” and the Caller ID
information is withheld.
INCOMPLETE DATA Caller information has been interrupted during transmission.
START/END
Indicates you are at the beginning or the end of the call record
log.
MESSAGE The message has been recorded as a memo.
Troubleshooting Guide
Telephone Solutions
No dial tone
• Check the hook switch to make sure it pops up.
Won’t dial out
• Make sure the tone/pulse setting is programmed correctly.
Phone doesn’t ring
• Check the ringer volume.
• Could have too many phones on one line.
(See FCC registration information regarding REN)
Low handset or speaker volume
• Check the volume settings.