GE 00024178 User Manual
Page 36
Can’t be heard by other party
• Make sure the phone cord is securely plugged in.
• Make sure the
MUTE function is OFF.
Memory dialing
• Make sure you entered the numbers correctly. (See “Memory.”)
Answerer Solutions
Doesn’t answer or answers on 10th ring
• Make sure the answerer is turned on.
• Memory is full, erase some messages.
• Check the AC power and phone line connections.
Incoming messages are incomplete
• Was an extension phone picked up?
• The caller left a message that is longer than the message length you set during
setup.
• Memory is full.
Won’t respond to remote commands
• Must use a touch-tone phone.
• Must enter the correct security code.
• Did unit hang up? If you take no action for a period of time, it automatically hangs
up.
Answerer doesn’t work
• Unplug the power cord from the electrical outlet and plug it back in to reset the
answerer.
After the unit is plugged in, the screen displays
FLASH ERROR
• Unplug the unit and plug it back in. If the message appears again, the unit needs
service.