GE 29484 2-Line - Manual (Page 15)

1
Adjusting the Headset Volume
Press the VOLUME ^ or v button while in headset mode (HEADSET indicator is on). You
may choose from four volume settings: LOW, MID1, MID2, and HIGH.
NOTE: To return to the preset settings, see “Reset to Default Settings.”
Conference Calls
This feature allows you to have a 3-way conversation using 2 lines.
Connecting and Conferencing
1. Press the line button for the line you want to use, then call the first party.
2. Press the HOLD button to place the first party on hold.
3. Call the second party, or receive a call, on the other line then press the CONF
button. The CONF icon shows in the display.
4. Begin speaking to both parties.
NOTE: To put both parties on hold, press the HOLD button.
NOTE: To speak to one party individually, press the HOLD button
then press the line of the party to whom you want to speak (the
second part remains on hold). If the speakerphone indicator is off
and you are using the speakerphone, press the SPEAKER button to
continue the conversation on the speakerphone.
Disconnecting One Party
Press the line of the person you want to continue talking to, and the other party will
be automatically disconnected.
Disconnecting Both Parties
Hang up the handset, or press SPEAKER or HEADSET.
NOTE: By pressing HOLD first, you may then disconnect from each
party individually.