GE 49-8779 - Manual (Page 17)

Oven Control Settings
BROIL HI/LO Pad
Press this pad to select the broil function.
CONV. ROAST Pad
Press this pad to select roasting with the convection
function.
AUTO SELF CLEAN
Press this pad to select the self-cleaning function. See
the
Using the self-cleaning oven section.
NOTE: Do not lock the oven door with the latch during cooking. The latch is used
for self-cleaning only.
+ and – Pads
These pads allow you to set times up to 9 hours and 55
minutes. Short taps to these pads change the time or
temperature by small amounts. Press and hold the pad
to change the time or temperature by larger amounts.
CLEAR/OFF Pad
Press this pad to cancel ALL oven operations except the
clock and timer.
Display
Shows the time of day, oven temperature, whether the
oven is in the bake, broil or self-cleaning mode and the
times set for the timer on automatic oven operations.
If “F–and a number” flash in the display and the oven control signals,
this indicates a function error code. If the function error code appears during
the self-cleaning function check the oven door latch—the latch handle may have
been moved, even if only slightly, from the latched position. Make sure the handle
is to the right as far as it will go. Press the CLEAR/OFF pad. Allow the oven to
cool for one hour. If the function error code repeats, disconnect the power to the
range and call for service.
PROBE Pad
Press this pad when using the probe to cook food.
CONV. BAKE Pad
Press this pad to select baking with the convection
function.
BAKE Pad
Press this pad to select the bake function.
1
3
2
4
5
10
11
12
13
Tr
oubleshooting T
ips
Installation Instr
uctions
Customer Ser
vice
Operating Instr
uctions
Safety Infor
mation
17