GE 49-8779 - Manual (Page 35)

Tr
oubleshooting T
ips
Installation Instr
uctions
Customer Ser
vice
Operating Instr
uctions
Safety Infor
mation
35
Never force the latch handle. Forcing the handle will damage the door
lock mechanism.
How to Set the Oven for Cleaning
Latch the door.
Press the AUTO SELF CLEAN pad.
Using the + or – pad, enter the desired clean time.
Clean cycle time is normally 3 hours. You can change
the clean time to between 2 hours and 4 hours,
depending on how dirty your oven is.
The self-clean cycle will automatically begin after CLEAN
is displayed and the time for the clean cycle is set. The
words
ON and LOCK will appear in the display. It will not
be possible to open the oven door until the temperature
drops below the lock temperature and the
LOCK light
goes off.
When the LOCK light is off, slide the latch handle to the
left as far as it will go and open the door.
■ The word door will be displayed, the word LOCK will
flash and the oven control will signal if you set the
clean cycle and forget to close the oven door.
■ To stop a clean cycle, press the CLEAR/OFF pad. When
the LOCK light goes off and the oven has cooled below
the locking temperature, open the door.
3
2
1
or