GE 49-8779 - Manual (Page 36)

Using the self-cleaning oven.
36
Operating Instr
uctions
Installation Instr
uctions
Safety Infor
mation
Tr
oubleshooting T
ips
Customer Ser
vice
How to Delay the Start of Cleaning
Latch the door.
Press the AUTO SELF CLEAN pad.
Using the + or – pad, enter the desired clean time.
Press the STOP TIME pad. The earliest stop time you
can set will appear in the display.
Using the
+ or – pad, enter the desired stop time.
The self-clean cycle will automatically begin after CLEAN
is displayed and the time for the clean cycle is reached.
The words
ON and LOCK will appear in the display. It
will not be possible to open the oven door until the
temperature drops below the lock temperature and the
LOCK light goes off.
When the LOCK light is off, slide the latch handle to the
left as far as it will go and open the door.
5
4
3
2
1
You may notice some white ash in the oven. Wipe it up with a damp
cloth after the oven cools.
If white spots remain, remove them with a soap-filled steel wool pad and rinse
thoroughly with a vinegar and water mixture.
These deposits are usually a salt residue that cannot be removed by
the clean cycle.
If the oven is not clean after one clean cycle, repeat the cycle.
■ You cannot set the oven for cooking until the oven is cool
enough for the door to be unlatched.
■ While the oven is self-cleaning, you can press the CLOCK pad to
display the time of day. To return to the clean countdown, press
the
COOK TIME pad.
■ If the shelves become hard to slide, wipe the shelf supports
with cooking oil.
After a Clean Cycle
or
or