GE ZV48R - Manual (Page 9)

9
PARTS PROVIDED
Locate the parts packed with the hood.
2 Stainless Steel Grease Filters
(3 filters with 48" models)
Allen Wrench
For Implement Rods
Installation Preparation
Duct Transition
with Damper
Backguard
2 Implement Rods and 4 Stand-offs
Heat Lamp
(2 with 48" models)
10 Phillips head screws.
Use 6 to secure hood to the
wood support. (2 are
secured to wood support)
Use 2 to secure 30" and 36"
backguards to wall. Use 4 to
secure a 48" backguard.
4 Phillips head screws to
secure the duct transition to
the hood outlet on the top.
6 (3/16") hollow wall anchors
with screws use 2 to secure
hood to the wall at the bottom.
Use 4 to secure backguard
and shelf.
4 screws to secure the wood
support to the wall
POZIDRIV 3
1 hex head safety screw
and lock washer, to
secure the blower.
2 flat washers
for wall anchors
Wood Support
with Original Screws
Warming Shelf
2 shoulder screws
to secure shelf to
bottom of hood.
2 Phillips head machine
screws to secure shelf to
bottom of hood.
Grease Tray
Locate and check contents.
Screws shown actual size.
Note:
Hardware appearance
may vary slightly.
HARDWARE
PACKAGE