GIGABYTE AMD Socket AM2 Motherboard GA-3PXSL-RH - Manual (Page 29)

BIOS Setup
2 9
IDE HDD Auto Detection
Press [Enter] to auto-detect the HDD’s size, head, etc on this channel.
IDE Channel 0~5 Master / Channel 0~1 Slave
The category identifies the types of hard disk from drive C to F that has been installed in the computer.
There are two types: auto type, and manual type. Manual type is user-definable; Auto type that will
automatically detect HDD type.
Note that the specifications of your drive must match with the drive table. The hard disk will not work
properly if you enter improper information for this category.
If you select User Type, related information will be asked to enter to the following items. Enter the
information directly from the keyboard and press <Enter>. Such information should be provided in the
documentation form your hard disk vendor or the system manufacturer.
Access Mode
This option allows user to set hard drive parameters.
Option: CHS, LBA, Large, Auto (Default Value)
Capacity Displays the capacity of HDD
Cylinder Number of cylinders
Heads Number of heads
Precmp Write precomp
Landind Zone Landing zone
Sectors Number of sectors
If a hard disk has not been installed, select NONE and press <Enter>.