GIGABYTE AMD Socket AM2 Motherboard GA-3PXSL-RH - Manual (Page 44)

GA-3PXSL-RH Motherboard
4 4
2nd LAN Controller
Auto Auto detect onboard second H/W LAN. (Default value)
Disabled Disable this function.
IDE HDD Block Mode
The IDE HDD Block Mode feature speeds up hard disk access by transferring data from
multiple sectors at once instead of using the old single sector transfer mode. When you enable
it, the BIOS will automatically detect if your hard disk supports block transfers and configure the
proper block transfer settings for it. Up to 64KB of data can be transferred per interrupt with IDE
HDD Block Mode enabled.
Enabled Enable IDE HDD Block Mode. (Default value)
Disabled Disable this function.
Onboard FDC Controller
Enabled Select “enabled” to active Onboard Floppy Controller. (Default value)
Disabled Disable this function.
Onboard Serial Port 1
Auto BIOS will automatically setup the port 1 address.
3F8/IRQ4 Enable onboard Serial port 1 and set IO address to 3F8. (Default value)
2F8/IRQ3 Enable onboard Serial port 1 and set IO address to 2F8.
3E8/IRQ4 Enable onboard Serial port 1 and set IO address to 3E8.
2E8/IRQ3 Enable onboard Serial port 1 and set IO address to 2E8.
Disabled Disable onboard Serial port 1.
Onboard Serial Port 2
Auto BIOS will automatically setup the port 2 address.
3F8/IRQ4 Enable onboard Serial port 2 and set IO address to 3F8.
2F8/IRQ3 Enable onboard Serial port 2 and set IO address to 2F8. (Default value)
3E8/IRQ4 Enable onboard Serial port 2 and set IO address to 3E8.
2E8/IRQ3 Enable onboard Serial port 2 and set IO address to 2E8.
Disabled Disable onboard Serial port 2.