GIGABYTE AMD Socket AM2 Motherboard GA-3PXSL-RH User Manual
Page 45
BIOS Setup
4 5
UART Mode Select
Normal
Using as standard serial port. (Default value)
IrDA Using as IR and set to IrDA mode.
ASKIR
Using as IR and set to ASKIR mode.
SCR Using as Smart Card Interface.
UR2 Duplex Mode
This entry can be adjust when user select [IrDA] in UART Mode item.
Full IR function Duplex Full.
Half IR function Duplex Half.
Onboard Parallel Port
378/IRQ7
Enable onboard LPT port and set address to 378/IRQ7.
(Default value)
278/IRQ5
Enable onboard LPT port and set address to 278/IRQ5.
3BC/IRQ7
Enable onboard LPT port and set address to 3BC/IRQ7.
Disabled
Disable onboard LPT port.
Parallel Port Mode
3BC/IRQ7
Enable onboard LPT port and set address to 3BC/IRQ7.
Disabled
Disable onboard LPT port.
SPP
Using Parallel port as Standard Parallel Port. (Default value)
EPP
Using Parallel port as Enhanced Parallel Port.
ECP
Using Parallel port as Extended Capabilities Port.
ECP+EPP
Using Parallel port as ECP & EPP mode.
Normal
Using Parallel port as Normal.
ECP Mode Use DMA
This option is only available if the setting for the Parallel Port Mode option is ECP. This option
sets the DMA channel used by parallel port.
The options: 1, 3 (Default value)