Headstock/column – Grizzly G4008 User Manual
Page 11
Advertising
G4008/G4009 Drill Press
-9-
Figure 4.
Headstock/Column
1.
Place the Headstock assembly onto the top of
the column and lower it until it is seated on the
column as far as it will go.
CAUTION:
The
head assembly is quite heavy; get assistance
when lifting.
2.
Rotate the headstock until it lines up with the
base.
3.
Secure the headstock to the column by tight-
ening the setscrews located on the side.
Figure 4.
4.
Screw the three handle bars into the tapped
holes in the handle body.
Figure 9.
Figure 5.
Advertising