Working table – Grizzly G4008 User Manual

Page 12

Advertising
background image

-10-

G4008/G4009 Drill Press

Figure 8.

Figure 6.

Figure 9.

1.

Place the crank handle onto the raise/lower
shaft and tighten down.

Figure 6.

5.

Thread the column lock handle into the col-
umn bracket. Leave the lock handle loose for
now.

Figure 9.

Working Table

Figure 7.

2.

Insert the M16-2.0 x 40 cap screw through the
hole located on the bottom/rear of the table
bracket.

3.

Thread the cap screw into the column bracket
and tighten down.

Figure 7.

4.

Place the table into the hole in the table brack-
et and secure with the table lock handle.

Figure 8.

Advertising