GE C2S980 - Manual (Page 25)

25
ge.com
12 Hour, 24 Hour or Clock Black-Out
Your control is set to use a 12 hour clock.
If you would prefer to have a 24 hour military
time clock or black-out the clock display,
follow the steps below.
Touch the BAKE and BROIL HI/LO
pads at the same time for 3 seconds
until the display shows SF.
Touch the CLOCK pad once.
The display will show 12 hr.
If this is the choice you want,
touch the START pad.
Touch the CLOCK pad again to change
to the 24 hour military time clock. The display
will show 24 hr. If this is the choice you want,
touch the START pad.
Touch the CLOCK pad again to black-out
the clock display. The display will show OFF.
If this is the choice you want, touch the
START pad.
NOTE: If the clock is in the black-out mode you
will not be able to use the Delay Start function.
Cook and Hold
Your new control has a cook and hold feature
that keeps cooked foods warm for up to 3
hours after the cooking function is finished.
This feature can only be used when
timed cooking.
To activate this feature, follow the steps
below.
Touch the BAKE and BROIL HI/LO
pads at the same time for 3 seconds
until the display shows SF.
Touch the COOKING TIME pad. The
display will show Hld OFF.
Touch the COOKING TIME pad again
to activate the feature. The display
will show Hld ON.
Touch the START pad to activate the
cook and hold feature and leave the
control set in this special features mode.
Consumer
S
uppor
t
Operating
Instructions
Safety
Instructions
Installation Instructions
Tr
oubleshooting
Tips
Your control will allow you to lock out the
surface burners, oven burners and control
panel so they cannot be activated.
To lock/unlock the controls:
Turn all surface burners off.
Touch and hold the GAS/CONTROL
LOCKOUT pad for 3 seconds until the
display shows LOC.
To unlock the control, touch and hold
the GAS/CONTROL LOCKOUT pad for
3 seconds until LOC disappears from
the display.
When this feature is on and the touch pads
are touched, the control will beep and the
display will show LOC.
■
The control lock-out mode affects all
controls. No controls will work when this
feature is activated.
■ The adjustment will be retained in memory
after a power failure.
Gas/Control Lockout (on some models)