GE JGRS06 - Manual (Page 9)

9
Operating Instructions
Safety Instructions
Consumer Support
Tr
oubleshooting T
ips
www.GEAppliances.com
Tones While Setting the Control Preheat Notification Tone
When you touch a touch pad you will hear
a beep. This beep will let you know you
have placed enough pressure on the pad
to activate it.
Attention Tone
This tone will sound if you set an invalid
function or try to set an additional
function. The tone can be quickly
identified by watching the display
messages.
When you set an oven temperature, the
oven automatically starts to heat. When the
temperature inside the oven reaches your
set temperature, a tone will sound to let you
know to place the food in the oven.
Power Failure
If a flashing time of day is in the display,
you have experienced a power failure. Reset
the clock.
To reset the clock, touch the TIMER/CLOCK
pad and hold 3 seconds. Enter the correct
time of day by touching the + or – pads.
Touch the START pad.
The control has a series of tones that will sound at different times. These tones may sound while
you set the control for an oven function or at the end of the oven function. They will also alert you
when an incorrect time or temperature has been entered or if there is a problem with the oven.