GE JV535 - Manual (Page 16)

16
Before you call for service…
Troubleshooting Tips
Save time and money! Review the following chart first
and you may not need to call for service.
Problem Possible Causes What To Do
Fan does not operate A fuse may be blown or a • Replace fuse or reset circuit breaker.
when the switch is on circuit breaker may be tripped.
Fan fails to circulate air Excessively soiled filter. • Wash and replace the filters. See the Reusable
or moves air more slowly Metal Grease Filters section.
than normal
• Replace the filter if it is too soiled to clean. If it
is not soiled, or if replacing the filter does not
solve the problem, call for service.
Fan continually cycles The motor is probably • Replace the filter if it is soiled. If it is not soiled,
off and on overheating and turning itself or if replacing the filter does not solve the problem,
off. This can be harmful to call for service.
the motor. Filter may be
excessively soiled.
Air coming from the Vent lever is in the • Move the lever back to the HORIZONTAL position
front vent (on some VERTICAL position (flat (flat against the metal top of the hood) to vent
models) when it is against the plastic blower to the outside. See Step 10 in the Installation
ducted to the outside housing) for recirculating. Instructions for vent lever operation. This is normal
if the hood has been installed to recirculate.
Consumer Support
Tr
oubleshooting T
ips
Installation Instructions
Operating Instructions
Safety Instructions