GE TAD-732 - Manual (Page 19)

19
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-by-
phone, require tone signals. If you have
pulse service, you can still use these
special tone services by following these
steps.
1. Be sure T/P is set to P .
2. Lift the handset and press TALK .
3. Dial the service’s main number.
4. When the service answers, press .
Any additional numbers you dial are
sent as tone signals.
5. After you complete the call, return
the handset to the base or press
TALK on the handset. The phone
automatically resets to pulse dialing.
USING PAGE
To page the person with the handset or
to find the handset, press
PAGE on the
base. The handset beeps three times. If
you want the handset to beep for a long-
er time, you can hold down
PAGE for 2
seconds to have the handset beep for
about 35 seconds.
To stop the handset from beeping be-
fore it automatically stops, press
TALK
twice or press PAGE .
Note: Paging does not work during a
call.
MEMORY DIALING
You can store up to 9 phone numbers in
memory, then dial a stored number by
pressing a one-digit memory location
number.
Each stored number can be up to 16
digits long, including tone and pause en-
tries.
43-732.fm Page 19 Friday, August 13, 1999 1:42 PM