GE 164D3333P071 - Manual (Page 46)

Before you call for service…
46
Troubleshooting Tips
Operating Instr
uctions
Installation Instr
uctions
Safety Infor
mation
Tr
oubleshooting T
ips
Customer Ser
vice
Problem Possible Causes What To Do
CLEAN light The oven door was • Turn the Oven
is on when you accidentally locked. Temperature knob to OFF .
want to cook Allow the oven to cool.
Never force the door
latch handle.
“F—and a number” You have a function • If a function error code
flash in the display error code. appears during the self-
cleaning cycle, check the
oven door latch. The latch
may have been moved, even
if only slightly, from the
locked position. Make sure
the latch is moved to the
right as far as it will go. Turn
the Oven Temperature
knob to OFF . Allow the
oven to cool for one hour.
Put the oven back into
operation.
• Disconnect all power to
the range for 5 minutes
and then reconnect power.
If the function error code
repeats, call for service.
Power outage Power outage or surge. • Some models will
automatically resume their
setting once the power is
restored. On models with a
clock, you must reset the
clock. If the oven was in
use, you must reset it by
turning the Oven
Temperature knob back to
OFF , setting the clock and
resetting any cooking
function.