GE 49-80575-1 User Manual

Page 45

Advertising
background image

GEAppliances.com

45

Safety Instructions

Operating

Instructions

Car

e and Cleaning

Tr

oubleshooting Tips

Consumer S

uppor

t

Problem

Possible Causes

What To Do

Food does not bake

Oven controls improperly set.

See the Using the oven section.

or roast properly

Rack position is incorrect

See the Using the oven section.

or the rack is not level.

Incorrect cookware or

See the Using the oven section.

cookware of improper
size being used.

Oven thermostat needs

See the Adjust the oven thermostat—Do it yourself!

adjustment.

section.

Food does not

Oven controls improperly set.

Make sure you touch the BROIL HI/LO pad.

broil properly

Improper rack position

See the Broiling Guide.

being used.

Cookware not suited

For best results, use a pan designed for broiling.

for broiling.

The probe is plugged

Unplug and remove the probe from the oven.

into the outlet in the oven.
(on some models)

In some areas the power

Preheat the broil element for 10 minutes.

(voltage) may be low.

Broil for the longest period of time recommended
in the Broiling Guide.

Oven temperature

Oven thermostat

See the Adjust the oven thermostat—Do it yourself!

too hot or too cold

needs adjustment.

section.

Storage drawer

Rear drawer support is

Reposition the drawer. See the Storage Drawer

is crooked

on top of the guide rail.

Removal instructions in the Care and cleaning of the
range
section.

Check to make sure drawer is properly seated
if removed.

Storage drawer

Power cord may be

Reposition the drawer and power cord. See the

won’t close

obstructing drawer

Storage Drawer Removal instructions in the Care and

in the lower back

cleaning of the range section.

of the range.

Rear drawer support is

Reposition the drawer. See the Storage Drawer

on top of the guide rail.

Removal instructions in the Care and cleaning of the
range
section.

Oven door is crooked

The door is out of position.

Because the oven door is removable, it sometimes gets out
of position during installation. To straighten the door, push
down on the high corner.

Advertising