Grizzly 10" x 22" Benchtop Lathe G0602 - Manual (Page 56)

-54-
Model G0602/G0752 (Mfg. Since 11/12)
leadscrew & carriage rack
oil type .... grizzly t23962 or iso 68 equivalent
oil Amount ......................................... As needed
lubrication Frequency ................................. daily
Before lubricating the leadscrew and carriage
rack (see
figure 84), clean them first with min-
eral spirits. use a stiff brush to help remove any
debris or grime. Apply a thin coat of oil along
the length of the carriage rack. use a stiff brush
to make sure oil is applied into the leadscrew
threads.
note: In some environments, abrasive material
can become caught in the leadscrew lubricant and
drawn into the half nut. In this case, lubricate the
leadscrew with a quality dry lubricant.
figure 85. Compound bottom slide.
compound slide
oil type .... grizzly t23962 or iso 68 equivalent
oil Amount ............................................thin Coat
lubrication Frequency ................................. daily
use the handwheel to move the compound slide
all the way toward you (see
figure 85), then wipe
clean the bottom slide with a rag and mild solvent.
Apply the lubricant and move the compound slide
back and forth to distribute the oil.
figure 84. leadscrew, rack and bedways.
rack
leadscrew
Bedways
bedways
oil type .... grizzly t23962 or iso 68 equivalent
oil Amount ......................................... As needed
lubrication Frequency ................................. daily
Before lubricating the bedways (see figure 84),
clean it with mineral spirits. Apply a thin coat
of oil along the length of the bedway. Move the
steady rest, carriage, and tailstock to access the
entire length of the bedways.
Bottom slide