Grizzly Hanging 3 Speed Air Filter G0738 - Manual (Page 14)

-12-
model g0738 (mfg. since 1/12)
5. push the on spEEd button repeatedly to
cycle through the three air flow speed options.
the lights on the control panel should display
the selected speed.
6. press the oFF button to turn the machine
OFF.
7. point the remote control directly at the con-
trol panel and press the remote control on
spEEd button to turn the machine
ON.
8. push the remote control on spEEd but-
ton repeatedly to cycle through the air flow
options. the lights on the control panel
should display the selected speed.
9. push the remote control timE button repeat-
edly to cycle through the three time options.
the lights on the control panel should display
the amount of time the air filter will run before
automatically turning
OFF.
10. press the remote control oFF button to turn
the air filter OFF.
site planning is an important step to maximize the
effectiveness of the hanging air filter. Air circula-
tion must be thought out and all obstructions to
the air path considered.
think of air circulation in terms of the circular
motion of the air before and after the air filter. the
air exiting the filter is exhausted at a higher veloc-
ity than that entering it. Consequently, exhaust
being vented inside a building can have an effect
on the pattern of air circulation.
Air circulation patterns will vary depending upon
which air flow speed is used and according to
your specific shop setup.
Figure 6 shows an
example of good air circulation.
Site Planning
Figure 6. good air circulation. the air filter
placement promotes circular air motion.
Air
Filter