Grizzly G0477 - Manual (Page 13)

Model G0477 15" Planer/Moulder
-11-
Inventory
After all the parts have been removed from the
two boxes, you should have the following items:
Inventory (Figure 3) Qty
A. Long Frames .............................................. 2
B. Short Frames .............................................. 2
C. Plain Legs ................................................... 2
D. Notched Legs ............................................. 2
E. Long Braces ............................................... 2
F. Short Braces .............................................. 2
G. Planer/moulder (not shown) ....................... 1
Components and Hardware (not shown)
•
Roller Adjustment Wrench .......................... 1
• Open-End Wrench 8/10mm ........................ 1
• Rubber Grip Magnets ................................. 2
• Hex Wrench 4mm ....................................... 1
• Dust Chute ................................................. 1
• Dust Chute Adapter .................................... 1
• Dust Collection Bag .................................... 1
• Bag Clamp .................................................. 1
• Cap Screw M6-1 x 25 ................................. 1
• Button Head Cap Screw M6-1 x 25 ........... 1
• Crank Handle ............................................. 1
• Handle Plug ................................................ 1
• Phillips Head Screw M6-1 x 25 .................. 1
• Cap Screws #10-32 x 2 3 ⁄
8
" ......................... 2
• Flat Washers #10 ....................................... 2
• Wing Screws 1 ⁄
4
-20 x 1 1 ⁄
4
" ........................... 4
• Flat Washers 1 ⁄
4
" ......................................... 4
• Threaded Guide Inserts ........................... 12
• Hex Bolts M8-1.25 x 80 (Stand) ................. 4
• Flat Washers 8mm (Stand) ........................ 8
• Hex Nuts M8-1.25 (Stand) .......................... 4
• Carriage Bolts 5 ⁄
16
-18 x 3 ⁄
4
" (Stand) ........... 24
• Flange Nuts 5 ⁄
16
-18 (Stand) ....................... 24
Figure 3. G0477 Inventory.
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
NOTICE
Some hardware/fasteners on the inventory
list may arrive pre-installed on the machine.
Check these locations before assuming that
any items from the inventory list are miss-
ing.
The Model G0477 is a
very heavy machine.
Serious personal injury
may occur if safe mov-
ing methods are not fol-
lowed. To be safe, you
will need assistance
when moving the ship-
ping box and removing
the machine from the
box.
A
B
C D
E
F