Grizzly h8234 - Manual (Page 10)

Model H8234 28° Framing Nailer -8 -
A safety mechanism (bump fire) on the
nose of the nailer protects against acci-
dental firing. When the trigger is pressed,
the nailer will not fire until the safety nose
mechanism is depressed.
Before you use your nailer for the first
time, check the safety nose mechanism to
ensure proper function.
to check the safety nose mechanism:
1. DISCONNeCT NAILeR FROM THe
AIR SUPPLY!
2. Make sure the magazine is empty and
contains no nails.
3. Make sure the trigger and the safety
nose mechanism move up and down
without sticking.
4. Connect the nailer to the air supply.
safety nose
mechanism
5. Without pressing the trigger, depress
the safety nose mechanism against a
scrap piece of wood that is clean and
free of any knots, nails, or other foreign
objects.
— If the nailer does not fire, then the
safety nose mechanism is working
correctly.
— If the nailer does fire when you
do this, immediately disconnect the
nailer from the air supply and call
Grizzly Technical Support at (570)
546-9663 for help.
— If the nailer does fire when the
trigger is pulled, without the safety
nose mechanism being depressed,
then the nailer is not working
properly.
— If you find that the safety nose
mechanism is not depressing
properly, check the lubrication of its
sliding components.
the safety mechanism is a mechanical
device that can fail. never rely on this
mechanism as an excuse to point the
nailer at yourself or any bystanders.
serious injury may occur.
do not attempt to modify or bypass
the safety nose mechanism to make
the nailer fire without pushing the
safety nose down.